top of page

Raptors Tag Group

Public·15 members

Mustek 1200 Ub Plus Windows 7 64 Bit Driver 26

Click Here ===>

Mustek 1200 Ub Plus Windows 7 64 Bit Driver 26

This option requires basic OS understanding.Select Your Operating System, download zipped files, and then proceed tomanually install them.Recommended if Mustek 1200 Ub Plus is the only driver on your PC you wish to update.

If the driver listed is not the right version or operating system, search our driver archive for the correct version. Enter Mustek ScanMagic 1200 UB Plus into the search box above and then submit. In the results, choose the best match for your PC and operating system.

found USB scanner (vendor=0x055f, product=0x0006, chip=MA-1017) at libusb:001:003 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage.I would have expected a device name in place of libusb:001:003 in the aboveoutput.Anyway, I now try to scan something:scanimage -LThis gives an error as follows:No scanners were identified. If you were expecting something different,check that the scanner is plugged in, turned on and detected by thesane-find-scanner tool (if appropriate). Please read the documentationwhich came with this software (README, FAQ, manpages).Taking a stab in the dark, I tried to install a driver module for the scanner:modprobe mustek_usbFATAL: Module mustek_usb not found.I guess that I do need to load some modules for the scanner.I have just found a man page, which I will be looking at over the next fewdays:man sane-mustek_usbIf anyone has any pointers with regards to using this device with Debian,then please let me know.Thanks in advance,Mark.-- Mark HobleyLinux User: #370818

I am working through the sane documentation.The configuration file /etc/sane.d/mustek_usb.conf now contains the followingentries:# Autodetect 1200 UB and Trust Compact Scan USB 19200usb 0x055f 0x0006/dev/bus/usb/001/003option 1200ubDevices are managed by udev on sane-usb states:Libusb can only access your scanner if it's not claimed by the kernel scanner driver.This filesystem must be mounted. That's done automatically at boot time, if/etc/fstab contains a line like this: none /proc/bus/usb usbfs defaults 0 0I have added that line to /etc/fstab and mounted the usbfs filesystem:cat /proc/bus/usb/devices gives:T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 0D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1P: Vendor=055f ProdID=0006 Rev= 1.00C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=496mAI:* If#= 0 Alt= 0 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none)E: Ad=01(O) Atr=02(Bulk) MxPS= 2 Ivl=0msE: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0msE: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=1msI did some googling, and that is the Mustek scanner :)scanimage -L still does not list the scanner at this time.I am working through the rest of the notes relating to udev now.

LABEL="libsane_usb_rules_end"SUBSYSTEMS!="scsi", GOTO="libsane_scsi_rules_end"LABEL="libsane_scsi_rules_begin"# Generic: SCSI device type 6 indicates a scannerKERNEL=="sg[0-9]*", ATTRStype=="6", MODE="0664", GROUP="scanner", ENVlibsane_matched="yes"# Some scanners advertise themselves as SCSI device type 3KERNEL=="sg[0-9]*", ATTRStype=="3", ATTRSvendor=="HP", ATTRSmodel=="C7670A", MODE="0664", GROUP="scanner", ENVlibsane_matched="yes"LABEL="libsane_scsi_rules_end"LABEL="libsane_rules_end"Is there anything I need to change in this fileI have rebooted the computer but I still do not get a /dev/usbscanner devicefile or a /dev/usb/ subdirectory.I added myself to the scanner group using:gpasswd -a mark scannerI now run: scanimage -Ldevice `mustek_usb:libusb:001:003' is a Mustek 1200 UB flatbed scannerOk, that looks good.I now run:scanimage >image.pnmAfter a short while, I get an image file.I examined this file and it is indeed a scanned image. It is in blackand white at the moment though.I'll have a play now to see if I can get a colour scan.Cheers, 1e1e36bf2d


Welcome to the group! You can connect with other members, ge...

bottom of page